Dishwashers - How do I adjust the upper rack of my dishwasher?
Applies to
- Dishwashers
Solution
Since the adjustability of your racks may vary by model, we recommend that you first reference your Owner’s Manual.
However, here are some helpful tips depending on your dishwasher tub type:
For Plastic Tub Dishwashers
- To raise the upper rack, press the lever on the rack toward the center of the rack and pull straight up.
- To lower the upper rack, press the lever and push down on the rack. Your Owner’s Manual may have a diagram for assistance.
For Stainless Tub Dishwashers
- The top rack height can be easily adjusted to accommodate loading taller dishes.
- To raise the rack, lift up until both sides are at the same height and the rack will secure in place. Ensure the rack remains level from front to back with both sides at the same height.
- To lower the rack, lift the rack slightly then push down and release.
Was this article helpful?
Related Articles
- Dishwasher Glass Trap and Filter Guide
- Dishwasher Error Code PF - Loss of Power
- What should I do if my dishwasher is not starting?
- Dishwasher Error Codes and Alarms Guide
- Dishwashers How-To Video - What to do if your Electrolux Dishwasher is NOT Draining
- How can I ensure the best drying results?
- Dishwasher Error Code i20 - Unit did not drain properly
- Dishwashers - How do I start my dishwasher?
- What can I do if my dishwasher is not draining?
- Dishwasher Not Starting