Dishwashers - Not Draining

Issue

• Dishwasher Not Draining
• Dishwasher Draining Issues
• Dishwasher water left in unit
• Water in the dishwasher after it runs

Solution

Is this a newly installed unit?

• Make sure the drain hose was installed properly. Check for any a high loop and for any kinks in the drain hose.
• For more information please refer to Dishwasher Drain Hose Guide

Has the drain hose been bumped or moved?

• A kink in the drain line can cause drain issues or water to pool in the bottom of dishwasher after the cycle is complete.
• Try to unkink and realign the drain hose and start a new cycle for the unit to drain and reset.
• For more information refer to Dishwasher - Drain Hose Guide.

When was the last time the glass trap and filter got cleaned?

• Sometimes food and debris can clog the glass trap and filter. Remove the glass trap and filter and rinse it out with warm water.
• For more information refer to Dishwasher Glass Trap and Filter Guide

Is the unit connected to a garbage disposal?

• Verify the knockout plug has been removed to allow proper drainage.

Did unit stop in the middle of a cycle?

• Note: If the unit doesn’t drain properly during a cycle, on some models you may notice flashing indicator lights. This is normal and typically signals a drainage issue.
  
• To reset the current cycle:
  Press and hold the Cancel button for 5–10 seconds. This will clear the existing cycle.
  
• To drain the unit:
  Start a new cycle after resetting.
  
• If the unit continues to have trouble draining or starting, please contact our customer support center for assistance.